Armattan Tadpole 2.5"is a set of parts that can be assembled. It's a little better than buying them separately!
A receiver is not included, so you need to prepare a receiver that matches your radio. It is best to use 3S 450mAh or 3S 650mAh battery.
With 3S 450mAh, the all-up weight is about 111g, and with 3S 650mAh, it is about 121g, and it is possible to fly for about 3 minutes depending on the flight content.
Although the recording camera is not included in the content, it is possible to easily make a full-scale FPV flight!
I think it is an aircraft that can be enjoyed by everyone from FPV beginners to advanced players.
* Batteries are not included.
* Propeller colors will be randomly selected.
* A separate screw for fixing the propeller is required. A screw of about M2 5.5mm is the best.
Please refer to the blog article from the related URL for how to assemble and set.
■ Related URL
・ Armattan Tadpole 2.5"Assembly <1> Frame
・ Armattan Tadpole 2.5"Assembly <2> Installation of FC/ESC, motor, and receiver
・ Armattan Tadpole 2.5 ”Assembly <3> FPV camera ・ Installation of VTX
・ Armattan Tadpole 2.5"setting <1> ESC setting
・ Armattan Tadpole 2.5"setting <2> BetaFlight 4.1.5 Part 1
・ Armattan Tadpole 2.5"setting <3> BetaFlight 4.1.5 Part 2
■ Package contents
・ Armattan Tadpole 2.5"frame kit x1
・ HGLRC FD413 STACK 16x16 2-6S F411 Flight Controller 13A BLS 4in1 ESC x1
・ RunCam TX200U x1
・ RunCam Phoenix 2 Nano (1000TVL COMS FPV Camera 2.1mm FOV 155 °) x1
・ HGLRC Forward 1103 8000KV Brushless Motor x4
・ TBS TRIUMPH PRO (U.FL) x1
・ HQ DURABLE PROP T2.5X2.5X3 (2CW + 2CCW) x1
・ HQ DURABLE PROP T65MM (5CW + 5CCW) x1
All carbon fiber and metal parts are guaranteed.
* Bolts, nuts, screws, aluminum standoffs, foam parts, discontinued parts, and models purchased from other than authorized dealers are not eligible.
If you would like to use it, please contact Armattan directly, or if you purchased it at our shop, we can act on your behalf, so please contact us. In that case, you will need the delivery note at the time of purchase, so please keep it in a safe place. In addition, it is mandatory to submit a photo of the damaged part when it is damaged, so please be careful not to disassemble or repair it or accidentally throw it away.
You can check the warranty from the manufacturer's site.
* The warranty applies only to the frame.