説明
小さくパワフル(25~800mW、調整可能)なビデオ送信機です。ピットモードは干渉の少ない電力レベルで、フライトコントローラーなどのチャンネルを素早く変更できます。
フィルタリングされた5V電源で動作。
アンテナコネクタはSMAメスソケット。
The smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other means of quickly changing channels. It runs off a filtered 5V power supply, so it's perfect when being connected to a TBS CORE PRO or TBS PowerCube (*)
NEW IN V3:
- Improved Voltage spikes acceptance from 6.5Vmax. on V2 to 13Vmax. on V3
主な特長
- 小さくて軽いビデオ送信機
- 最大出力 800mW
- ウルトラクリーントランスミッション (一度に16人のパイロットまで!)
- PitMode - レース中にクワッドの電源を入れます
- フォールバックボタンメニューでOSD、FCおよびRCチャネルの変更が容易
- 堅牢なRFアンプにより、アンテナなしで数時間の電源投入が可能
- クリーンな電源投入とビデオ切り替え
- CE認定
PITMODE - MADE TO RACE
Zero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels.
SMARTAUDIO V2 - FULL CONTROL
SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!
CLEANSWITCH - NEIGHBOR FRIENDLY
CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)
SAY NO! TO DIPSWITCHES
Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies.
仕様
- 動作電圧: 4.5 - 5.5V
- 供給電流: 600mA
- 動作時温度: watch for normal airflow
- オーディオキャリア周波数: 6.5 MHz
- ビデオ入力インピーダンス: 75 Ohm
- 重量: 5g (SMAあり、アンテナなし)
- アンテナコネクタ: SMA Female Socket with screw mounting holes
- ビデオ形式: NTSC/PAL
- 出力電力: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)
* HAMチャネルおよびHAMパワーレベルでの操作にはHAMライセンスが必要です。VTxの出荷時には、正規のチャネルのみが有効になっています。アンロック手順については、マニュアルを参照してください。
パッケージ内容
- 1x TBS UNIFY 5G8 ビデオトランスミッター
- 1x 5V ビデオトランスミッターピッグテールケーブル