説明
KISS ESC 25AはKISSファミリーのM4MCUを搭載しており、強力なモーターを備えたマルチコプター用に設計されています。40Aのアクティブ電流制限は、KISS ESC 32Aと同じ機能を提供。
小型で細長い形状のESCなので、APEXなどアームの細い機体にもフィットします。 (APEXの場合アームの根元の方だと綺麗に収まります。)
特徴
- 32-Bit-ARM Cortex M4 MCU @ 80 MHz
- Telemetry capability (voltage, current, temperature, rpm)
- Over current protection (measures the current and reduces it to max 40A)
- Over temperature protection (reduces the max power if hotter then 100°C)
- sinHybrid :: Sinwave/BackEMF Hybrid mutation for smoother running.)
- Dshot 2400 (Full resolution of 2000 steps takes only 6.5μs).
- Supports all common Dshot commands like turtle mode, 3D mode and rotation direction change.
- Expanded adaptive auto timing (7.5-30° advance on each commutation),
- For Race Multicopters (25A continuous also with weak cooling),High max. RPM (500.000ERpm, 71.400Rpm with a 14Pole Motor)
- Small size (12.5x26mm)
- Accurate RPM control (2000 steps using Dshot)
- No additional capacitor needed for 3-5S.
- Very fast throttle response, Linear throttle response, Active freewheeling (low diode losses)
- Regenerative braking
- Dshot 100-2400, Oneshot42, Oneshot125 and (25 - 500 Hz) PWM get autodetected.
- Supports FrSky Sbus, Graupner SumD, TBS CROSSFIRE and Multiplex SRXL, S-Port, Graupner HOTT, TBS CROSSFIRE and Sensorbus
- Operating voltage 6 - 24V (2-5s)
- Maximum continuous current 25A, instantaneous maximum current 40A, actively limited
- 600000 ERPM maximum rotation field speed (useage up to 500000 recommended)
- 6 Layer 70 µm copper PCB where almost all of the layers can be used for the current as the logic parts sits on a seperate PCB
- All in and outputs are protected against over (~30V) and undervoltage(~-30V) but are still 3,3 and 5V compatible
- Modern smart gate driver. gate driver
- 396 µF 25V ceramic capacitors onboard
仕様
- サイズ:12.5x26mm
- 重量:3g
- 動作電圧:6-24V (2~5S)
- 396μF 25Vセラミックコンデンサ搭載
- 最大連続電流25A、瞬時最大電流40A、アクティブ制限
関連URL
-
マニュアル ( ダウンロード)
- Firmware v121a (ダウンロード)
- Sound Editor V1.0c (ダウンロード)
- Flashloader (ダウンロード)
- sinHybird-en ( ダウンロード)